12-1015 Associated Digital Battery Electrical System Analyzer Starter, Alternator, Ground and Battery Test with Built-in Thermo Printer and USB Port

6366 Associated 4 x 20 Industrial Gang Charger for Standard Automotive, Deep-Cycle, AGM and Gel Cell Batteries - Fully-Automatic charging channels that control voltage and current up to 20 Amps per circuit. Four sets of LED indicators showing charging status by battery. Four sets of detachable 6 foot leads with 300 Amp heavy duty clamps. Charges all types of 12 volt batteries, AGM Batteries, Gel Cell Batteries, Sealed Batteries, Standard Flooded Batteries - including Spiral Cell, Orbital, or Optima batteries. Patented diagnostics indicate weak or defective battery.

The stainless steel receptacle mounts onto a truck bumper and connects directly to a battery in vehicle. The extra long starting cables reach stalled vehicles up to 25 ft away. Features Associated's patented "Stop/Go" light.

The ATEC 3075A Automatic Automotive battery charger provides fully automatic charging of 6 & 12 volt Standard, GEL and AGM battery types. Five charging modes are available 6V/2 Amp, 6V/6 Amp, 12V/2 Amp, 12V/12 Amp & 12V/75 Amp for engine starting. The built-in digital display shows the voltage before during and after charging, amperage and time on charge. Heavy-duty transformer and rectifier provide long life. Safety features include, built-in circuit protection, reverse polarity protection. Automatically checks for correct connection (requires a minimum of 1 volt DC at the battery terminals). Heavy-duty cables and clamps are corrosion-resistant for better connections. Clamps connect to side or top mount battery terminals. Ideal for charging or boosting during winter season when the starting performance of vehicle batteries is lowered by cold or extreme weather conditions.

6296 ATEC Kwikstart 12/24 Volt Portable Power and Jump Starter with Internal Charger - With two 12 volt 22 AH AGM batteries this unit delivers best in class performance by; jump starting with more than 700 CCA, 12 or 24 volt operation with a three position switch for added safety, 12 volt DC accessory outlet.

Professional quaIity, heavy-duty booster cables ensure quick and efficient connections. Associated Equipment has deslgned these cables wlth your safety and convenience in mind. 12’  Long with 4 AWG Heavy Copper Wire with T-94 Rated For Low Temp (-40f) 500 Amp Current Load Rating and Heavy-Duty SAE Rated Clamps.

6023 Associated 60/50/25/300 Amp 6/12/24 Volt Commercial Automotive Battery Charger (230 VAC; 50/60 HZ). The Flagship Model 220 volt fleet car battery charger on the market, with a boost rating of 300 Amps. Charges 6, 12 and 24 volt batteries. UL listed for indoor/outdoor use, "Safe In Any Weather". Charges 6, 12, and 24 volt batteries. Heavy-duty transformer, patented "Sub-Sil" multi diode rectifiers, longer AC cord and DC leads are standard features for higher performance. UL listed for indoor/outdoor use, "Safe In Any Weather".

175 amp lexan plug is made from a single piece impact resistant polycarbonate housing. It features both high physical strength and superior dielectric properties. The silver plated solid copper contacts offer low resistance for superior conductivity. Self cleaning contact design resists arcing by keeping conductive surfaces clean and free of corrosion. The contacts have flared and heat treated barrels which readily accept fine stranded wire and allow easy, quality crimping. Integral stainless steel springs maintain constant pressure on the contact to insure a consistent, low-resistance connection. For other connectors see our Electrical Center HERE.

Kwik Start vehicles anywhere without AC power. On-board starter battery gives more cranking power than any fast charger, up to 850 amps cold cranking power. Will accommodate a user supplied group 24 battery (L 10.3" X W 6.8" X H 8.9"). Smart choice for car dealers, airports, industrial plants and shopping centers to assist customers and employees where there is no electrical power.

Designed with highest quality and versatility in mind. Interprets data from the charging/starting system on easy-to-read LED display voltmeter and ammeter. Also shows +/- amps for easy diagnosis of current leakage problems. The 500 amp, carbon pile variable load capability, provides accurate load testing for up to 1,000 CCA batteries. A great time-saver for testing electrical systems on 12, 12/24 and 24 volt vehicles. Features include Large, easy to read, LED digital AMPS and VOLTS meters. Displays voltages to ±99.9 volts DC on the EXT position and up to 35.0 volts DC on the INT position. The AMP meter displays DC currents up to 999 amps and reads both + and - amps for easy diagnosis of leakage current problems. The carbon pile is rated 500 amps on 12 volt batteries for load testing batteries up to 1000 CCA capacity. Curved carbon discs allow better low end resolution of current and longer life. Defective Diode indicator light lets you know when alternator output diodes or GM diode trios have failed.

Associated 6216 Polarized A/N Plug Kit. AER100 3 PIN NATO AN2551 standard plugs are made of strong poly-carbonate construction. Screws together in minutes. Sleeves are solid copper, silver plated. With solenoid pin. Corrosion proof. Mates with AN2552-3A external power receptacle.

6036B Associated 6/12 Volt 1000 Amp Carbon Pile Battery Load Tester is Ideal for battery distributors, high volume testing, and fleet use. High resolution carbon pile assembly, featuring unique curved carbon discs, ensures maximum contact, reduces hot spots, prevents edge burning and provides smoother operation and longer life.