Cat5e Jack to Jack Keystone Jack Module

The Cat5e Keystone Couplers requires no termination, just simple plug in Cat5e RJ45 Cables each end The module offers a high performance transmission that meets or exceeds Cat5e standards. They have been designed to be installed into most UK and European keystone applications, including standard or angled faceplate products, patch panels or surface boxes. Features Quick and easy to install Suitable for all standard keystone applications Category 5e hardware performance More Info

One Day In-Person UFO/PON Installation Course

Get ahead of the competition with Connectix Training Sessions Overview Correct installation procedures are a fundamental part of today’s structured cabling industry. We are committed to ensuring that our cabling systems are installed quickly, professionally and in compliance with the rapidly changing standards proposed by the ISO/IEC, ANSI/TIA and CENELEC. Modern building designs often include consideration for cabling infrastructures to support voice and data distribution. It is increasingly the case that tender documents, project... More Info

Kit Includes RJ45 Crimp tool, Plugs, Stripper & Continuity Tester

This simple termination kit includes all the products required for terminating RJ45 Cable & Testing the finished leads. (cable not included) More Info

UK Mains (BS 1363) Plug to IEC 60320 C13 - 5amp Fused

These UK to IEC C13 leads are ideal for connecting between wall sockets or PDU's to your Computers, Servers, Switches and other equipment with a C13 Male Connector. Features:UK BS 1363 Plug Fused with a 5amp fuse IEC 60320 C13 Female Connector Available in 1mt, 2mt, 5mt & 10mt More Info

Available in 25m rolls.

Our braided sleeving offers a flexible cable protection, high abrasion resistance and ease of application. The special braid construction permits the sleeving bore to beexpanded up to 300%.This is suited for the mechanical protection of wire harnesses, hoses and all other applications where exceptional flexibility combined with superior abrasion / cut resistance is required. It also serves as an economical means for wire bundling that will not trap heat or moisture, expanding over irregular shapes, and then contracting to conform and... More Info

MTP Fibre Cassette Patch Panel to Hold 4 MTP High Density Cassettes

The Starlight® Modular Panel and cassettes have been designed to simplify installation, and offer users an easy to expand modular system. Starlight® modular panels can accept 4 cassettes, which are simply inserted and locked into the panel by push/pull pins. More Info

Punchdown tool for terminating on Krone Style IDCs

Our Punch down tool is perfect when terminating the back of any Connectix Cabling System RJ45 Patch Panels or Module. More Info

CCS Server Rack Designed to House Servers & 19" Equipment

Connectix Server Cabinets have been designed to offer the optimum housing for servers and networking hardware. Mesh front and rear doors plus a vented roof add up to offer maximum ventilation; whilst the lockable doors all round provide essential security. All doors are fully removable with quick release hinges for easy equipment installation, and the large floor aperture gives maximum cable access. Connectix server cabinets are available in various configurations and are supplied fully assembled. The high quality attractive black finish... More Info

USB 2.0 A Male to A Female Extension Cable

USB Extension Cable for ConvenienceWhether due to space, convenience or décor, sometimes you need a longer USB 2.0 cable. If you need to extend the reach of your USB peripheral - such as a mouse, VoIP phone or printer The cable features an A-Male connector on one end and an A-Female connector on the other. Typically, the Male A connector plugs in to your computer and the Female A connects to the cable you need extending. Check your device manuals to make sure this is the connector you need. This USB 2.0 Extension Cable supports the full... More Info

Connectix singlemode angle polish connector fibre optic pigtails are high performing, quality manufactured assemblies designed for use within FTTx, data centre and telecommunication applications. Widely used within GPON applications and data centre, the pigtails can be manufactured in OS2 grade singlemode G.657.A1 or G.657.B3 (ITU-T G.657.A1 as standard from stock). The pigtails are manufactured using 900μm optical fibre and feature a strain relief boot for protection. Tails can be manufactured in different colours (singlemode standard... More Info

Kit Includes RJ45 Crimp tool, Cat6 Plugs, Stripper & Continuity Tester

This simple termination kit includes all the products required for terminating RJ45 Cat6 Cables & Testing the finished leads. (cable not included)Kit includes: 1 x RJ45 Crimp Tool 1 x Cable Stripper 1 x Contunity Tester 100 x Cat6 RJ45 Plugs 100 x Strain relief boots (select colour above) More Info

CCS Server Rack Designed to House Servers & 19" Equipment

Connectix Server Cabinets have been designed to offer the optimum housing for servers and networking hardware. Mesh front and rear doors plus a vented roof add up to offer maximum ventilation; whilst the lockable doors all round provide essential security. All doors are fully removable with quick release hinges for easy equipment installation, and the large floor aperture gives maximum cable access. Connectix server cabinets are available in various configurations and are supplied fully assembled. The high quality attractive black finish... More Info

DDA Compliant double gang faceplate to take up to 4 Euro Modules

Grey faceplate Ideal for installations that requires a high contrast between the mounting surface and the outlet (as specified in the Disibility Discrimination Act) More Info

One Day In-Person Structured Cabling Installation Course

Get ahead of the competition with Connectix Training Sessions This is a 1 day course, with both the Theory and the Practical elements being completed at our headquarters in Braintree, Essex. OverviewCorrect installation procedures are a fundamental part of today’s structured cabling industry. We are committed to ensuring that our cabling systems are installed quickly, professionally and in compliance with the rapidly changing standards proposed by the ISO/IEC, BSEN and ANSI/TIA.Modern building designs often include consideration for cabling... More Info

The Connectix Lockable Wall Box provides an ideal solution for secure patching in any location where a cabinet or other suitable enclosure is not available.Manufactured from 1.5 mm mild steel, the enclosure features two doors with different locks and an interchangeable internal panel which is available for a wide range of adaptor types. Cable entry and patchcord exit is from the top or the bottom of the unit. Four knockouts are provided (top and bottom) to suit common cable gland sizes.The enclosure can be supplied loaded or unloaded and... More Info