Professional quality, heavy-duty booster cables ensure quick and efficient connections. Associated Equipment has designed these cables with your safety and convenience in mind. From side terminal adapters and "Flexi-Spring" cable guards to insulated safety clamps and 100% copper jaws.

6141-25 Associated 6141 Associated AN2551 Aircraft Plug-In Cable 25Ft 4 Awg A/N Plug - This Aircraft Jumper Cable features a standard 3-pin Lexan female plug (equivalent to AN2551) on one end and alligator clamps on the other end.

The 6075S Wall Mount Parallel Bus bar set for parallel charging has just  been revamped, Now with Smart Circuit Protection. Protects and monitors  each circuit as it is being charged. Individually Fused Circuits for safety. Microprocessor controller monitors each circuit against over charging, detects bad batteries and high heat build-up in batteries. Status LED for each Circuit. for the ultimate in safety and convenience.  Ten battery capacity. Insulated fiberglass backboard with 10 pairs DC charging leads, 4 gauge, 48" long with 300-amp insulated safety clamps. Use one or combine additional bars for added capacity.Use with Model 6065, Model 6066A or Model 6068 multiple parallel battery chargers. Can be used with other manufactured Parallel chargers.

Associated polarized plug kit replaces old broken, worn, or over heated plugs. The kit comes with red moulded clamshell halves, two female jacks and screws and nuts to assemble. *Assembly requires soldering and Kester Resin "44" and 60/40 solder.

6141 Associated 6141 Associated AN2551 Aircraft Plug-In Cable 15Ft 4 Awg A/N Plug - This Aircraft Jumper Cable features a standard 3-pin Lexan female plug (equivalent to AN2551) on one end and alligator clamps on the other end.

The series charger workhorse. Charges 2-60 cells from 0 to 6 amps. With state-of -the-art, anti-spark delay, voltage is shut off when current is interrupted, eliminating sparking.

Professional quaIity, heavy-duty booster cables ensure quick and efficient connections. Associated Equipment has deslgned these cables wlth your safety and convenience in mind. From side terminal adapters and "Flexi-Spring" cable guards to insulated safety clamps and 100% copper jaws.

12-1007 ATEC Folding Light 30+1 Smd 80-100 Lumen 3.7V Li-Ion Battery utilize the latest Lithium-Ion rechargeable battery technology for long life, better brightness and cordless for hands free use by the serious technician. 30 side facing flood light mode Super bright SMD LED's with a special designed lens for each bulb provides 3-4 times brightness of other lights). 1 forward facing Super bright LED in flashlight mode.

Kwik Start vehicles anywhere without AC power. Now accommodates a group 31 battery. On-board starter battery gives more cranking power than any fast charger, up to 1100 amps cold cranking power. Will accommodate a group 31 Max user supplied battery (L 13" X W 7" X H 9.5"). Smart choice for car dealers, airports, industrial plants and shopping centers to assist customers and employees where there is no electrical power.

Kwik Start vehicles anywhere without AC power. On-board starter battery gives more cranking power than any fast charger, up to 850 amps cold cranking power. Will accommodate a user supplied group 24 battery (L 10.3" X W 6.8" X H 8.9"). Smart choice for car dealers, airports, industrial plants and shopping centers to assist customers and employees where there is no electrical power.

6044 Associated Equipment Model 6044 Automated Battery / Electrical System Tester - An automated battery testing unit that uses no dirty, maintenance-prone carbon piles. Just enter the discharge current, press the “start” button and the 6044 will perform the BCI battery test automatically, giving the most accurate means of testing a battery. Testing for the alternator and starter has also been automated, simplifying the use of this very versatile electrical tester.

The ATEC 3100A Automatic Automotive battery charger provides fully automatic charging of 6 & 12 volt Standard, GEL and AGM battery types. Five charging modes are available 6V/2 Amp, 6V/8 Amp, 12V/2 Amp, 12V/15 Amp & 12V/100 Amp for engine starting. The built-in digital display shows the voltage before during and after charging, amperage and time on charge. Heavy-duty transformer and rectifier provide long life. Safety features include, built-in circuit protection, reverse polarity protection. Automatically checks for correct connection (requires a minimum of 1 volt DC at the battery terminals). Heavy-duty cables and clamps are corrosion-resistant for better connections. Clamps connect to side or top mount battery terminals. Ideal for charging or boosting during winter season when the starting performance of vehicle batteries is lowered by cold or extreme weather conditions.